100 Day No Hassle returns

Back to Top

Tag Archives: speakman eyewash

  • Does the SE590A - 45L or SE590A - 106 L Portable Emergency Eyewash comply with Australian Standard 4775

    Posted on: 23, Mar
    SE590A - 106 L Portable Eye and Body wash SE590A - 106 L Portable Eye and Body wash

    In accordance with AS 4775 Safety Deluge Showers and Emergency Eyewashes are required to have the following flow rates:-

    Eye washes :-     1.5 L per minute for 15 minutes

    Safety Showers:-              76 L per minute for 15 minutes

    Therefore the SE590A with a 45 or 106 L cylinder do meet the standards for eyewash, however not for a safety shower.

    Therefore the Safety shower (on the 106 L cylinder) and the Drench Hose (on the 45L cylinder) can be described as Supplementary body washes intended as a support system, not in place of Primary Emergency Response Systems.

    Below are some relevant parts of AS4775 to assist you in your decision:-

    AS 4775 Emergency Eye wash & Shower Equipment

    Section: 7 Plumbed and Self -Contained Eyewash Equipment

    7.2 Performance of plumbed and self-contained eyewash units

    When activated plumbed and self-contained eye wash equipment shall deliver flushing fluid to the eyes at a flow rate not less than 1.5 litres per minute for a minimum of 15 minutes. Where the fluids supply to plumbed equipment is time-limited, this shall be clearly indicated and quantified by prominent signage adjacent to the equipment.

    Where eye wash equipment has a time-limited supply of flushing fluid, a risk assessment shall be conducted to identify whether a longer flow period is required. Such a risk assessment may address the nature and quantity of hazardous materials at the location, likely exposure scenarios, distance to emergency response and emergency facilities and so on.

    Appendix F1       Personal Eyewash Units

    The first seconds following an eye injury are often critical to keeping eye injury to a minimum. A personal eye wash may be kept in the immediate vicinity of employees working in a potentially hazardous area. The main purpose of these units is to supply immediate flushing. With this accomplished, the injured individual should then proceed to a plumbed or self-contained eye wash and flush the eyes for the required 15 minutes.

    0 Comments
  • Does my Safety Shower or Emergency Eyewash need a dedicated supply line?

    Posted on: 02, Nov

     

    Speakman Emergency Eye Face Wash Speakman Emergency Eye Face Wash

    We receive a few enquiries asking whether a Emergency Safety Shower or Eye wash needs its own dedicated water supply line.

    The answer is no, as long as it meets the minimum standards below, however it is also worthwhile to consider the following points when planning the pipeline to your Safety Shower or Eye Wash.

    The minimum requirement for a combination emergency eye wash and safety shower is   25 mm, 1 inch pipe.

    A larger diameter may depend on the following:

    • Distance from the mains water;
    • Is the pipe straight,  water volume, pressure will be effected by pipe bends
    • Is the water supply used for other processes
    • If it is a long distance you may consider using a 32 mm pipe.

    We suggest you check the water flow in existing line,  looking for 120 Lt/minute.

    There is no requirement for a dedicated water supply to the safety shower.

    Let us know if you require any additional information for our Speakman Safety Shower and Emergency Eye wash range.

    0 Comments
  • Do I need to use a Green Light at my Safety Shower or Emergency Eye wash?

    Posted on: 21, Sep
    Speakman Safety Shower & Eye wash Green Fluorescent Light Speakman Safety Shower & Eye wash Green Fluorescent Light

    This is a common question we are asked regarding safety lighting for Emergency Safety Showers and Eye wash units.

    Please see below the Australian Standards AS4775 requirement for lighting

    The three sections require the equipment be identified by signage and the area is well illuminated:

    The use of a green light is not stipulated in this Australian Standard, although it is used to identify the equipment location, This is more based around risk assessment, the colour green is associated with a medical facility. The green light readily identifies to users where the safety shower or eye wash is located for ease of finding in an emergency.

    A green light doesn’t illuminate the area. The area still needs to be well illuminated.

    AS4775-2007 Emergency eye wash and shower equipment

    6.6 Location       (Safety Shower)

    Emergency safety showers shall be positioned in accessible locations that require no more than 10 seconds to reach. The shower shall be located on the same level as the hazard and the path of travel shall be free of obstructions that may inhibit the immediate use of the equipment. Where the possibility of temperature extremes exists, equipment shall be protected from their effects both with respect to the equipment’s operation and the flushing fluid.

    Each emergency safety shower location shall be identified with a highly visible sign complying with AS1319 positioned so the sign is visible throughout the area served by the shower.

    The area around the emergency shower shall be well illuminated.

    7.4 Location       (Eye Wash)

    Emergency Eye washes shall be positioned in accessible locations that require no more than 10 seconds to reach. The eye wash unit shall be located on the same level as the hazard and the path of travel shall be free of obstructions that may inhibit the immediate use of the equipment. For a strong acid or strong caustic, the eyewash should be located immediately adjacent to the hazard.

    Each eyewash location shall be identified with a highly visible sign complying with AS1319 positioned so the sign is visible throughout the area served by the shower.

    The area around the eyewash shall be well illuminated.

    8.4 Location       (Eye Face Wash)

    Emergency Eye/face washes shall be positioned in accessible locations that require no more than 10 seconds to reach. The eye/face  wash unit shall be located on the same level as the hazard and the path of travel shall be free of obstructions that may inhibit the immediate use of the equipment. For a strong acid or strong caustic, the eye/face wash should be located immediately adjacent to the hazard.

    Each safety eye/face wash location shall be identified with a highly visible sign complying with AS1319 positioned so the sign is visible throughout the area served by the shower.

    The area around the eyewash shall be well illuminated.

    Til next time, Keep Safe

    0 Comments
  • What to do when you have no plumbed water - Speakman Portable Drench Hose and Eyewash

    Posted on: 02, Aug

    There is always going to be new sites were workers will require an Eyewash or Drench Hose setup, however the won't be any plumbed water supply. A good option until the water comes (which may never occur) if your worksite is continually moving is to get a portable Speakman Emergency Eye wash and Drench hose. This unit can come in a 45 or 106 L cylinder tank.

     

    Ensure you complete your risk assessment to confirm these will be suitable for your particular site.

    If you do require these units then you will also probably need some Anti Microbial Eyewash water preserver. The water preserver comes in a 4 pack. Each 225 ml bottle makes 80 L of water last 4 months without changing.

    Below is a link to the Data sheet on the Speakman Portable Eyewash and Drench Hose SE590A-45 L.

    Portable Safety Eye wash SE 590A - 45 IOM Data Sheet

    0 Comments
  • Where should Safety Showers and Emergency Eye-Face Washes be located

    Posted on: 28, May

    Below is an extract of Information courtesy of Australian Standard AS4775-2007 Emergency Eyewash and Shower Equipment.

    This is general information and should be used in conjunction with a detailed risk assessment of your site conditions and materials.

    LOCATION OF SAFETY SHOWERS AND EYEWASHES

    All units shall be positioned in accessible locations that require no more than 10 seconds to reach. The unit shall be located on the same level as the hazard and the path of travel shall be free of obstructions that may inhibit the immediate use of the equipment.

    For a strong acid or strong caustic the eye/face wash should be immediately adjacent to the hazard.

    Safety Showers

    Emergency showers shall be designed and located so that the bottom of the shower head is not less than 2083mm or more than 2438mm in height from the surface on which the user stands.

    Eyewashes and Eye/Face Washes

    The unit shall be positioned with the nozzles not less than 838mm and no greater than 1143mm from the surface on which the user stands and 153mm minimum from the wall or obstruction.

    Combination units

    Combination units shall be designed so all components can operate individually and be positioned so they meet the requirements according to the location of showers and eyewashes.

    End of extract

    Additional Information

    For additional information please consult Australian Standard AS4775-2007 Emergency Eyewash and Shower Equipment.

    If you require a Emergency Safety Shower or Eye/Face Wash please click this link to check out our extensive range of Speakman Safety Showers and Eyewashes

    0 Comments
  • Speakman Safety Showers discounted in end of Financial Year Warehouse Clearance

    Posted on: 01, Jun

    Our complete range of Speakman Safety Showers, face & eye wash units discounted.

    Click here to check out the savings:-  http://www.bigsafety.com.au/safety-showers-eyewashes.html

     

    Click here for the flyer to give to your boss :- http://www.bigsafety.com.au/files/showerandcabinetpromo.pdf

    21 Comments

6 Item(s)